Vpn > Vpn Passthrough - Linksys WAP54GP - Wireless-G Access Point User Manual

Chapter 
VPN > VPN Client Access
User Name Enter a name for the VPN client.
Password Enter a password for the VPN client.
Re-enter to confirm Enter the password again to confirm
it.
Allow user to change password?
user change his or her password from the user's QuickVPN
client, select Yes.
When you have finished entering the user name and
password of the VPN client, click Add/Save to add the VPN
client to your list. A warning message will appear the first
time you add a VPN client. After all VPN clients are added
to the VPN Client List Table, click Save Settings.
VPN C;lient Access Warning
VPN Client List Table
No.
This is the number assigned to this VPN client. The
Router supports up to 10 QuickVPN clients.
Active If you want to activate this VPN client, click the
Active checkbox.
Username
The Username assigned to this VPN client will
be displayed here.
Password
The Password assigned to this VPN client will
be displayed here.
Edit/Remove If you want to change the settings for a
VPN client, click Edit and then make your changes. If you
want to delete a VPN client from your list, click Remove.
Wireless-G VPN Router with RangeBooster
If you want to let the
Configuring the Wireless-G Router
Certificate Management
This section allows you to manage the certificate used
for securing the communication between the router and
QuickVPN clients.
Generate Click this button to generate a new certificate
to replace the existing certificate on the router.
Export for Admin Click this button to export the certificate
for administrator. A dialog will ask you to specify where
you want to store your certificate. The default file name
is "WRV200_Admin.pem" but you can use another name.
The certificate for administrator contains the private key
and needs to be stored in a safe place as a backup. If the
router's configuration is reset to the factory default, this
certificate can be imported and restored on the router.
Export for Client
Click this button to export the certificate
for client. A dialog will ask where you want to store your
certificate. The default file name is "WRV200_Client.pem"
but you can use another name. For QuickVPN users to
securely connect to the router, this certificate needs to be
placed in the install directory of the QuickVPN client.
Import
Click this button to import a certificate previously
saved to a file using Export for Admin or Export for
Client. Enter the file name in the field or click Browse to
locate the file on your computer, then click Import.
When you have finished making changes to the screen,
click Save Settings to save the changes, or click Cancel
Changes to undo your changes. For help information,
click More.
VPN > VPN Passthrough
The VPN > VPN Passthrough screen is used to allow VPN
tunnels to pass through the Router's firewall using IPSec,
L2TP, or PPTP protocols.
VPN > VPN Passthrough
IPSec PassThrough Internet Protocol Security (IPSec) is
a suite of protocols used to implement secure exchange
of packets at the IP layer. IPSec Passthrough is enabled by
default to allow IPSec tunnels to pass through the Router.
To disable IPSec Passthrough, select Disabled.