Firewall; Firewall > General; Firewall > Port Forwarding - Linksys WAP54GP - Wireless-G Access Point User Manual

Chapter 
This tab is used for Wireless Distribution System (WDS).
WDS will ONLY work with SSID1. Make sure that the
channel and security settings are the same for all WDS
enabled devices.
WDS allows a wireless signal to be repeated by a repeater.
This mode allows a wireless client to connect to the Router
through a repeater, such as WAP54GP or WAP54GPE, when
operating in the Repeater Mode. This mode allows you to
extend the coverage of the Router by using up to three
repeaters. Select Auto Select to enable the remote access
point when operating in Repeater Mode or select Manual
and enter the MAC address of the repeater.
Click the Site Survey button to view the available access
points.
When you have finished making changes to the screen,
click Save Settings to save the changes, or click Cancel
Changes to undo your changes. For help information,
click More.

Firewall

The Firewall tab is used to control access to the Internet by
users of your internal network.
Firewall > General
The Router's firewall enhances the security of your
network. You can implement a Stateful Packet Inspection
(SPI) firewall, block anonymous Internet requests, and
enable block mechanisms.
Firewall > General
DoS Prevention
Denial of Service (DoS) Prevention
checks incoming packets before allowing them to enter
your network. To use this feature, select Enabled from
the drop-down menu. If you do not want DoS Prevention,
select Disabled.
Internet Block
Block Anonymous Internet Requests
network from being "pinged" or detected and reinforces
your network security by hiding your network ports, so it
Wireless-G VPN Router with RangeBooster
is more difficult for intruders to work their way into your
network. Click the checkbox to block anonymous Internet
requests.
Block Multicast
be forwarded automatically to multiple recipients at the
same time. When Block Multicast is disabled (multicasting
is permitted), the Router allows IP multicast packets to be
forwarded to the appropriate computers in the LAN. Click
the checkbox to filter out multicasting.
Web Block
Proxy
Router's security. Denying Filter Proxy will disable access
to any WAN proxy servers. To enable proxy filtering, click
the checkbox next to this option.
Java
deny Java applets, you run the risk of not having access to
Internet sites created using this programming language.
To enable Java applet filtering, click the checkbox next to
this option.
ActiveX
If you deny ActiveX, you run the risk of not having access to
Internet sites created using this programming language.
To enable ActiveX filtering, click the checkbox next to this
option.
Cookies
by Internet sites when you interact with them. To enable
cookie filtering, click the checkbox next to this option.
SIP Application Layer Gateway
phones to operate behind a NAT router. To enable this
feature, select Enable from the drop-down menu.
When you have finished making changes to the screen,
click Save Settings to save the changes, or click Cancel
Changes to undo your changes. For help information,
click More.
Firewall > Port Forwarding
This keeps your
Configuring the Wireless-G Router
Multicasting allows a transmission to
Use of WAN proxy servers may compromise the
Java is a programming language for websites. If you
ActiveX is a programming language for websites.
A cookie is data stored on your PC and used
Firewall > Port Forwarding
This option allows VoIP
8