Back Panel - Cisco WAP54GP - Wireless-G Access Point Quick Start Manual

INTERNET—(Green) Shines steady when the router is connected to your
broadband network device (cable, DSL modem, or other). Flashes when
the router is sending or receiving data over the Internet port.
WIRELESS—(Green) Shines steady when there is a successful wireless
connection. Flashes when the router is actively sending or receiving data
over the wireless network.
1-4 (ETHERNET)—(Green) Shines steady when a device is connected to
the specified port. Flashes when the router is actively sending or receiving
data over the specified port.

Back Panel

POWER—Connects the router to power, using the AC power cable.
RESET—Performs the following functions:
• Warm reboot—Press the button for one second to restart the router
without losing any of the current configuration settings.
• Factory reset—Press the button for approximately 15 seconds to reset
the router to the factory default settings. You can also restore the
factory default settings from the Administration > Factory Defaults page
in the web-based Configuration Utility.
INTERNET—Connects the router to your broadband network device
(cable, DSL modem, or other).
1-4 (ETHERNET)—Connects the router to your PCs and network devices.
2 Cisco Small Business WRV210 Quick Start Guide