Default Settings - Philips 20PT643F Service Manual

Default settings:

NORMAL (color temperature = 9600 K):
NORMAL RED = 40
§
NORMAL GREEN = 40
§
NORMAL BLUE = 40
§
To adjust NORMAL RED, NORMAL GREEN, and NORMAL BLUE:
1. To enter SDAM, press the following key sequence on the remote control
transmitter: 0 6 2 5 9 6 directly followed by the MENU button (do not allow the
display to time out between entries while keying the sequence).
2. Use the MENU UP/DOWN keys to highlight the WHITE TONE sub menu.
3. Press the MENU LEFT/RIGHT keys to enter the WHITE TONE sub menu.
4. Use the MENU UP/DOWN keys to select NORMAL RED, NORMAL GREEN, or
NORMAL BLUE.
5. Use the MENU LEFT/RIGHT keys to adjust the value of NORMAL RED,
NORMAL GREEN, or NORMAL BLUE.
6. When all desired changes to the WHITE TONE sub menu values are made,
press the MENU button to return to the top level SDAM menu.
7. To ensure the WHITE TONE settings are saved:
Turn the television set 'off' by using the 'POWER' button on the remote
§
control transmitter or the local keyboard.
Disconnect the television set from AC power for at least ten seconds.
§
Reconnect the television set to AC power.
§
Turn the television set 'on' by using the 'POWER' button on the remote
§
control transmitter or the local keyboard.