Connecting The Handset; Installing The Stand (Optional) - Cisco WIP310 - iPhone Wireless VoIP Phone User Manual

Cisco unified communications manager express for ip phone models

Hide thumbs Also See for WIP310 - iPhone Wireless VoIP Phone:

Table of Contents

Installing Your Phone

Connecting the Handset

STEP 1

CAUTION

STEP 2

STEP 3

STEP 4

NOTE

STEP 1

STEP 2

Cisco Small Business Pro IP Phone SPA50X User Guide (SPCP)

Turn the phone body over to expose the ports on the back of the unit.

Do not insert a telephone line cord into the AUX (auxiliary) port.

Insert the long end of the phone cord into the handset port on the phone body that

is marked with a phone symbol.

(Optional) Route the phone cord through the cable slot.

Insert the other end of the phone cord into the port at the bottom of the handset

(not shown).

Do not attach the desk stand if you want to mount the phone to the wall. If you are

attaching a SPA500S attendant console, attach the console before attaching the

desk stand.

Connect the phone stand by lining up the tabs on the stand with the slots on the

phone body.

Slide the bottom tabs into the lower slots on the phone body and lightly press

down on the stand. It should easily slide into the upper stand slots. Do not force.

Table of Contents