Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual page 63

Chapter 3 Setting Up Cisco Wireless IP Phones
Table 3-1 Configuration Task List for the Cisco Wireless IP Phone
Required Task
1. Gather the following
information for use in
Cisco CallManager
Administration:
Information for the device
•
information fields, if
applicable, such as the
device pool and calling
search space.
The Cisco CallManager
•
user to associate with the
phone.
The number of lines and
•
associated directory
numbers to assign to the
phone
Features to configure for
•
the phone.
Configure routers, gateways,
2.
and switches to handle voice
communication.
3. Perform a site survey to
determine where to place and
install access points (APs) for
wireless voice coverage.
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
Preparing to Install the Cisco Wireless IP Phone 7920
Purpose
Use this information when using
the Phone Configuration page in
Cisco CallManager
Administration.
Device Information fields on this
page auto-populates if information
is relevant and available. You can
edit fields to override system
settings on a per-device basis.
Establishes the infrastructure for
the IP telephony network.
Identifies areas where RF signal
coverage is required. Locates high
usage areas (conference rooms),
areas with RF interference (labs,
equipment rooms), and other
necessary coverage areas for
wireless phones (stairwells,
elevators, breezeways).
For More Information
See the "Adding Phones to
the Cisco CallManager
Database" section on
page 3-7.
See the "Configuring Cisco
Wireless IP Phones in
Cisco CallManager" section
on page 7-2.
Refer to Cisco CallManager
System Guide.
Refer to Cisco CallManager
Administration Guide.
See the "Components of the
VoIP Wireless Network"
section on page 2-5 and the
documentation included
with these devices.
Refer to the Cisco Wireless
IP Phone 7920 Design and
Deployment Guide.
3-3