Monitor; Monitor & Click; [F6] Monitor; Mon&Click - Yamaha A4000 Owner's Manual

6. MONITOR

Sets monitoring of the input signal. Also allows generation of
a click signal at a specified tempo.
Press the [REC] button and then the [F6] button to go to the
MONITOR display.
1 display page is provided: Mon&Click (Monitor & Click).
Monitor & Click
[REC] Button [F6] Button
Cursor q (MONITOR) allows the input signal being
recorded to be routed to the specified output for monitoring.
Cursor w (CLICK) makes it possible to create a "click track"
which can be used as a reference when recording drum, per-
cussion, or similar samples.
• When Click is turned on, a special "click" sample is created in
memory (this sample will not be created, however, if the "click"
sample is already in memory).
• If a sample named "click" is already in memory, that sample will be
used to create the click sound, and the sample's output setting will
determine the output via which the click sound will be produced.
Cursor q (Monitor)
Cursor
q
Knob 1 Knob 2
Turn

Monitor

Cursor
action Output
Press
Tree View MONITOR
action
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Monitor Output
Turn the knob to select the output location for the monitor
signal.
Note that the AS1&2, AS3&4, AS5&6, and DIG&OPT set-
tings are effective only if you have installed the optional
AIEB1 expansion board.
[Range] StereoOut, AsgnOutL&R,
AsgnOut1&2 — AsgnOut5&6, DIG&OPT
• When the DIGITAL or OPTICAL input is selected via
the Record Setup page (REC-SETUP-RecSetup)
(page 155), only StereoOut can be selected.
"REC-Mon&Click"
Knob 3 Knob 4 Knob 5
Monitor Level — —
QUICK... — —
[ Press] MONITOR
Pressing this knob alternately turns the MONITOR func-
tion on and off. A speaker icon appears above Knob 2
when the MONITOR function is turned on.
Knob 3
[ Turn] Monitor Level
Sets the monitor output level. This has no effect on the
recording level.
[Range] 0 — 127
• When the DIGITAL or OPTICAL input is selected via
the Record Setup page (REC-SETUP-RecSetup)
(page 155), the monitor level cannot be changed.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Cursor w (Click)
Cursor
w
Knob 1 Knob 2
Turn Click
Page
action Tempo
Press
Tree View MONITOR
action
Knob 1
Same function as Cursor
Knob 2
[ Turn] Click Tempo
Sets the tempo for the click.
[Range] 80.0 — 159.9
[ Press] MONITOR
Pressing this knob alternately turns the MONITOR func-
tion on and off. A speaker icon appears above Knob 2
when the MONITOR function is turned on.
Knob 3
[ Turn] Click Level
Sets the output level for the click.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] Click Beat
Sets the number of beats.
[Range] 1 — 15
A5000/A4000 •
RECORDING-MONITOR
Knob 3 Knob 4 Knob 5
Click Click
Level Beat On/Off
QUICK... —
q
(page 163).
Chapter 6 RECORD Mode
Click
—
163