Table of Contents
Advertisement
3. Insert the microSD
card and slide it into
the holder until it fits.
The gold contacts of
the card should face
down with the notched
edge on the left side.
4. Place the battery
into the battery
compartment noting
the correct polarity.
Carefully press down
the battery until it
snaps in place.
CAUtION:
• Use only the battery recommended by the manufacturer.
Using an incompatible battery with the phone may cause risk
of an explosion.
• Dispose of the used batteries according to the
manufacturer's instructions, or ask your local authorities for
assistance.
5. Replace the back
cover, sliding it
upward until it snaps
in place.
10
™
Removing the SIM card,
microSD
card, and battery
™
1. Slide the cover in the
direction of the arrow.
Lift and set it aside.
2. Pull the protruding
film on top of the
battery in the
direction of the
arrow, then carefully
lift the battery out of
its compartment.
NOte: Be careful when using the protruding film on the battery.
Incorrect usage may damage/tear the protruding film
3. Use your fingertip to
slide the SIM card
out of the holder in
the direction of the
arrow.
4. Refer to step 3
to remove the
microSD
card.
™
Advertisement
Table of Contents
