Table of Contents
Advertisement
Inserting the SIM card and
battery
When you register with a service provider, you
receive a SIM card (Subscriber Identity Module
card). Your phone must have a SIM card in
order to make calls. The SIM card is a computer
chip that contains your phone number,
phonebook information, and service provider
information. Handle it with care and do not bend
it or expose it to static electricity or dirt. Be sure
the power to your phone is off before you insert
your SIM card.
The SIM card slot is situated underneath the
battery. To insert the card, follow these steps:
1. Press the back cover
and slide the cover off to
remove it.
2. Remove the battery. The
battery compartment has
a notch at the top to make
it easier to grasp and
remove it.
Getting Started
3. Insert the SIM card into
the holder with the correct
orientation. The gold
contacts of the SIM card
should face down.
4. Place the battery back into
the battery compartment
noting the correct polarity.
5. Replace the battery cover.
Place the back cover
against the phone case,
then slide it upwards to
lock into place.
Caution:
• Use only the battery recommended by the
• Dispose of the used batteries as instructed by
manufacturer. Using an incompatible battery with the
phone may cause risk of an explosion.
the manufacturer or ask your local authorities for
assistance.
13
Advertisement
Table of Contents
