Dell Diagnostics; When To Use The Dell Diagnostics; Starting The Dell Diagnostics From Your Hard Drive - Dell Inspiron 530sa Owner's Manual

Dell Diagnostics

CAUTION:
safety instructions in the Product Information Guide.

When to Use the Dell Diagnostics

If you experience a problem with your computer, perform the checks in Lockups
and Software Problems (see "Lockups and Software Problems" on page 70)
and run the Dell Diagnostics before you contact Dell for technical assistance.
It is recommended that you print these procedures before you begin.
NOTICE:
The Dell Diagnostics works only on Dell™ computers.
NOTE:
The Drivers and Utilities media is optional and may not ship with your computer.
See "System Setup" on page 185 to review your computer's configuration
information, and ensure that the device that you want to test displays in the
system setup program and is active.
Start the Dell Diagnostics from your hard drive or from the Drivers and
Utilities media.

Starting the Dell Diagnostics From Your Hard Drive

The Dell Diagnostics is located on a hidden diagnostic utility partition on
your hard drive.
NOTE:
If your computer cannot display a screen image, see "Contacting Dell" on
page 200.
1 Ensure that the computer is connected to an electrical outlet that is
known to be working properly.
2 Turn on (or restart) your computer.
3 When the DELL™ logo appears, press <F12> immediately. Select Boot
to Utility Partition from the boot menu and press <Enter>.
NOTE:
wait until you see the Microsoft
computer and try again.
NOTE:
been found, run the Dell Diagnostics from the Drivers and Utilities media.
4 Press any key to start the Dell Diagnostics from the diagnostics utility
partition on your hard drive.
88
Troubleshooting Tools
Before you begin any of the procedures in this section, follow the
If you wait too long and the operating system logo appears, continue to
If you see a message stating that no diagnostics utility partition has
® ®
Windows desktop; then, shut down your