Inspiron 530sd
4 Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.
5 Wait for approximately five seconds to clear the password.
6 Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2
and 3 to enable the password feature.
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 174).
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
8 Connect your computer and devices to electrical outlets, and turn them
on.
1 2 3
1 2 3
Appendix
193