NEC SVP SERVER - INSTALLATION SETUP AND Installation And Setup Manual page 32

4-2 Configuring the SVP Server
Table 4-1 VT-100 terminal configuration
Figure 4-1 Netlink SVP-II System Menu window
Run a terminal emulation program (such as HyperTerminal™) or use a
Step 2
VT-100 terminal.
a VT-100 terminal.
Options
Bits per second
Data bits
Parity
Stop bits
Flow control
Press ENTER to display the login window.
Step 3
Enter the default login: admin and default password: admin. These are
Step 4
case sensitive. The Netlink SVP-II System Menu window displays
(Figure 4-1).
SVP Server Installation, Setup, & Maintenance Manual - Revision 1
Table 4-1 describes the configuration to use when using
Required Entries
9600
8
None
1
None