Table of Contents
Advertisement
Installing a SIMM
Install a SIMM as follows.
Remove the system unit cover.
1.
Locate the SIMM sockets (see "Option Installation
2.
Procedures" earlier in the chapter).
Remove any currently installed SIMMs that are not
needed.
Before installing a SIMM, reduce static discharge by
touching the system's metal chassis.
3.
Align the notched end of the SIMM with the socket end
closest to the front of the system.
4.
Insert the SIMM at an angle into the socket.
!
CAUTION
Installing Options 3-21
Advertisement
Table of Contents
