T
Administrative Password
This field allows you to enable an administrative level
password during POST and to enter Setup. When both
the "User Password is" and "Administrative Password
is" are "Enabled," only the Administrative Password
gives you full access to all Setup fields. This field can be
either "Enabled" or "Disabled." The default is
"Disabled."
Set User Password and Set Administrative Password
Enable either or both the User or Administrative Passwords
and a dialog box with the following prompts appears.
Passwords are not case sensitive.
To set a password, type the password and press
Reenter your password and press
If there is already a User or Administrative Password, then
a dialog box with the following prompts appears.
Unattended Start
The Unattended Start field controls the point at which the
User Password is required. The Unattended Start field can
only be set if a User Password is in effect.
Disabled (default)
before the system boots. The text string prompt "Enter
Password (1)" is displayed.
Enter new password: [
Confirm new password:
[
Enter current password: [
Enter new password: [
Confirm new password:
[
prompts the user for the password
NEC Drivers and Utilities 4-29
Enter
.
Enter
.
]
]
]
]
]