NEC POWERMATE ES 5250 Manual page 78

Follow this procedure to launch the Application and
Driver CD.
! CAUTION
Do not select and install drivers for any hardware
that is not currently installed on the system.
Doing so can damage the operating system.
Launch the NEC Application and Driver CD as follows:
T
In systems running the Windows NT operating system,
insert the NEC Application and Driver CD after the
system reboots and you have chosen the Windows NT
Workstation operating system. Be sure to insert the CD
before Windows NT actually completes its boot and
displays the NT logon screen.
Note:
Install the optional software located
on the NEC Application and Driver CD after the
after you first logon to Windows NT.
T
For systems running the Windows 95 or Windows 98
operating system, insert the NEC Application and Driver
CD into the CD-ROM drive after the system reboots.
The CD autorun feature loads the NEC Application and
Driver Installation program. The Application and Driver
Installation Utility dialog box appears. See "Installing
Software" for further instructions.
Configuring the System 3-31