Table of Contents
Advertisement
Replacing the Front Panel — Desktop
If a 5 1/4-inch device has been removed from your system,
you need to replace the blank panel before replacing the front
panel. The blank panel covers the opening previously used by
the device.
Replace the desktop front panel as follows.
1. Replace the metal panel in the chassis bay if necessary.
Press the panel into the opening.
2. If necessary, replace the blank panel to cover the bay
opening in the front panel. From the inside, fit the blank
panel into bay opening, and press it until the tabs lock in
place.
3. Align the eight front panel locking tabs with the slots in
the front of the system unit (see the following figure).
Align the front USB port with the cutout on the front
panel.
4. Press along the edges of the front panel until it snaps into
place.
5-82 Installing Options
Advertisement
Table of Contents
