Power Saving; Setting The Lcd And 2Nd-Lcd Backlight; Setting The Key Backlight; Restore Factory Settings - NEC N223I Using Manual

Power Saving

Set the Power Saving function to save consumption of battery power when your phone is open.

Setting the LCD and 2nd-LCD backlight

You can select from 3 levels of power saving; Standard, Saving power1 and Saving power2.
If Saving power2 is set, your phone uses the least consumption of battery power.
Press 6, and 1.
Press 1 to set Standard, 2 to set Saving power1 or 3 to set Saving power2.

Setting the Key backlight

Press 6 and . Use the

Restore factory settings

This function will revert your phone to its factory settings.
Your phonebooks will be unaffected.
Press 5 and 7.
Press Softkey 1 to confirm or Softkey 2 to cancel the operation.
and keys to highlight "Key backlight", then press Softkey 1 to toggle between on and off.
In the Car mode, the level of power
saving is fixed in Standard.
By restoring the factory settings,
any changes you have made to
your phone's set-up will be lost.
Examples of some of these
settings are as follows:
Ringer volume
Ringer type
Mode settings
LED colour
23