Setting up your phone
Time, date & alarm set
Your phone has the ability to store the time and date for two time zones: Home (local time) or World. This information is displayed, in 12 or
24 hour format (see below), on the standby screen and can be used to trigger an alarm. To set the time and date, use the following procedure.
Setting the time
Press
5, 3, 2 and 1 for the Home (local) clock or
will be displayed.
Key in the time (using the format shown above the time field) and press Softkey 1.
Setting the date
Press
5, 3 and 3. The set date screen will be displayed.
Key in the date (using the format shown above the date field) and press Softkey 1.
Format time
Press
5, 3, 6 and 2. The 12/24 hour menu screen will be displayed. The currently selected option will have a
Press 1 for 24 hour or 2 for 12 hour then press Softkey 2.
Format date
Press
5, 3, 6 and 1. The date format menu screen will be displayed. The currently selected option will have a
Press 1 for European format (dd/mm/yyyy), 2 for American format (mm/dd/yyyy) or 3 for Chinese format (yyyy/mm/dd) then press
Softkey 2.
Show clock
Press
5, 3 and 1. The show clock menu screen will be displayed. The currently selected option will have a
Press 1 for the local clock, 2 for the local and remote clocks or 3 for no clock display.
5, 3, 2 and 2 for the World clock (remote). The relevant clock set screen
The time is always entered in the 24
hour format even if you wish to
display it in the 12 hour format.
over its icon.
over its icon.
over its icon.
19