NEC DSX Software Manual page 221
Hide thumbs
Also See for DSX:
- Feature handbook (192 pages) ,
- Quick reference (32 pages) ,
- User manual (21 pages)
Table of Contents
Advertisement
Setting Up Ring Group DILs
1.
Should a DIL route to a Ring Group during the day?
1.
If yes, in 3112-01: Direct Termination in the Day (page 819) enter the Ring Group master number.
- Use a System Night key to switch a DIL to a Ring Group from day to night mode.
2.
If no, in 3112-01: Direct Termination in the Day (page 819) enter a day destination other than a Ring
Group master number.
2.
Should overflow occur for a DIL to a Ring Group that is unanswered during the day?
1.
If yes:
- In 3112-02: Enable Day Overflow (page 819) enter
- In 3112-03: Day Overflow Destination (page 820) enter the day overflow destination. The destina-
tion can be:
- An extension
- A UCD Group master number
- The voice mail master number
- A Ring Group master number
- Key Ring (by pressing
2.
If no, in 3112-02: Enable Day Overflow (page 819) enter
3.
Should a DIL route to a Ring Group at night?
1.
If yes, in 3112-04: Direct Termination at Night (page 820) enter the Ring Group master number.
- Use a System Night key to switch a DIL to a Ring Group from day to night mode.
2.
If no, in 3112-04: Direct Termination at Night (page 820) enter a day destination other than a Ring
Group master number.
4.
Should overflow occur for a DIL to a Ring Group that is unanswered at night?
1.
If yes:
- In 3112-05: Enable Night Overflow (page 820) enter
- In 3112-06: Night Overflow Destination (page 821) enter the day overflow destination. The destina-
tion can be:
- An extension
- A UCD Group master number
- The voice mail master number
- A Ring Group master number
- Key Ring (by pressing
If no, in 3112-05: Enable Night Overflow (page 820) enter
2.
5.
Be sure the DIL destination extension has a line key for the DIL.
1.
In 2121-[01 to 24]: Feature Key Codes (page 758), to assign the key as a line key enter
2.
In 2121-[01 to 24]: Feature Key Data (page 758), enter the line circuit number (
6.
Optionally set up a line key for the DIL on a DSS Console.
In 2402-[01-60]: DSS Console Key Codes (page 801), to assign the key as a line key enter
1.
In 2402-[01-60]: DSS Console Key Data (page 801), enter the line circuit number (
2.
DSX Software Manual
Yes
CLEAR
)
CLEAR
)
Group Ring
.
No
.
.
Yes
.
No
1
-
64
).
-
1
64
Features ◆ 191
03
.
.
03
).
- Quick Links:
- Using the Dsx Software Manual
Hide quick links:
Advertisement
Table of Contents
