Connecting To A Computer Modem; What If I Have A Digital Subscriber Line (Dsl) - Dell 964 Owner's Manual

Photo all-in-one printer
Hide thumbs Also See for 964:
Table of Contents

Advertisement

Connecting to a computer modem

Connect a phone cord from the FAX connector (
1
to the telephone wall jack.
Remove the protective plug from the PHONE jack connector (
2
on the back of the printer.
Connect a phone cord from the telephone to the computer modem.
3
Connect a phone cord from the computer modem to the PHONE jack connector (
4
right side connector) on the printer.
NOTE: If the phone communication is serial in your country (such as Germany, Sweden, Denmark,
Austria, Belgium, Italy, France, and Switzerland), you must remove the blue plug from the right
connector (
be able to use this port for additional devices in these countries.

What if I Have a Digital Subscriber Line (DSL)?

DSL delivers digital data to a computer through a telephone line. Your Dell Photo AIO Printer
964 is designed to work with analog data. If you are faxing over a telephone line connected to a
DSL modem, install a DSL filter to avoid interference with the analog fax modem signal.
Connect the DSL filter to an active telephone line.
1
Connect the printer directly to the output of the DSL filter.
2
NOTE: Do not install any splitters between the DSL filter and the printer. Contact your DSL service
provider if you need more help.
54
Faxing
), and insert the supplied yellow terminator for your fax to work correctly. You will not
— left side connector) on the printer
— right side connector)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

964 all in one photo printer

Table of Contents