Table of Contents
Advertisement
Wireless Home Audio
Wi-Fi Protected Setup™ Discovery
connect to your router using the Wi-Fi Protected Setup™
button on your router.
Advanced
This option is used for IP configuration. A
dynamic or static IP address can be selected here.
Dynamic IP
The dynamic IP option should be selected
•
if your router or network connection automatically
provides an IP address to devices on the network.
Once this option is selected, the Details screen can be
used to verify that an IP address has been obtained.
Static IP
Selecting Static IP will prompt you to enter
•
the IP address. To enter the IP address using the
remote control, remove the existing address by using
the left arrow on the Navigation Halo. Numbers can be
manually entered using the keypad or arrow up and
down on the Navigation Halo to scroll through the
number selections. To move to the next digit, use the
right arrow on the Navigation Halo. To enter a dot (.)
or period in the IP address, press the zero (0) button
twice.
Details
This option displays the current network
connection settings including the wireless network name,
wireless security type, DHCP status, IP address, subnet
mask, gateway, and DNS information.
Zones and Libraries
Rename Zone
This option is used to rename a device
with a name that will allow you to know where it is located
in your home. This makes it much easier to select which
areas to play music to or link.
Rediscover
If one of the Wireless Home Audio devices or
one of your libraries on the network is not appearing, use
this option to rescan for any devices or libraries that are
not showing up.
Controller/Wireless-N Touchscreen Remote
This option is used to
General Settings
The General option allows you to configure general
devices settings.
Date/Time
Auto update
When this option is enabled, the date and
time settings are automatically updated via the Internet.
Set Time
A series of screens will appear allowing you to
enter the month, day, year, and time manually.
Set Time Zone
Select your local time zone.
Daylight saving
This option should be selected when
observing daylight saving time.
Time Format
This allows you to select a 12-hour or
24-hour time format. The 12-hour format is the default
setting.
Date Format
Allows you to specify the order that the day,
month, and year are displayed.
Using your Controller
31
Advertisement
Table of Contents
