Table of Contents
Advertisement
Wireless Home Audio
7.
If you have an existing Cisco account, enter the e-mail
and password associated with the account, click Next
and skip to step 9. If you do not have an account, click
on the I do not have an account link.
8.
Create a Cisco account by entering your e-mail address
in the Email field and type in a password in the Password
and Retype Password fields. Click Next to continue.
9.
Select the device that you want to set up. In this case it
is the Controller (DMRW1000). Click Next.
Controller/Wireless-N Touchscreen Remote
Setting Up Your Controller
10.
Remove the back cover of the Controller and insert the
battery as shown. Replace the cover and click Next.
11.
Plug the USB cable (included with the Controller) into
your computer and the other end with the mini-USB
connector into your Controller and click Next.
12.
EasyLink Advisor will search for the Controller. This
may take a few minutes.
7
Advertisement
Table of Contents
