To Replace A Plug-In Module - HP OmniBook 7100 Reference Manual

Making Connections

To replace a plug-in module

If you are inserting or removing a CD-ROM / floppy disk drive, LS-120 drive, or DVD
drive, shut down the OmniBook.
1. From the Start menu, shut down the OmniBook. (This is not necessary if you are
removing a battery from the plug-in module bay and inserting another battery.)
2. Slide and hold the release latch, then pull out the module, as shown.
3. Slide the new plug-in module into the OmniBook until it clicks into place.
4-4