Using the Recovery CD
When choosing a file system, refer to the Windows NT Resource Kit for a detailed
discussion of FAT and NTFS file systems.
13. When prompted, choose No, Do Not Create An Emergency Repair Disk, then
click Next.
If is more useful to create a repair disk after installation is complete and after you
have installed your drivers and other applications.
14. When prompted, choose Do Not Connect The Computer To A Network At This
Time," then click Next.
Connect to a network after initial installation is complete.
15. Continue following the Windows NT setup instructions.
To install Service Pack 3 for retail Windows NT 4.0
If you've installed a retail version of Windows NT 4.0, you'll need to install Service
Pack 3. This is located on Recovery CD in the root directory \NT4_SP3.
1. Connect the ac adapter and turn on the OmniBook.
2. From the Start menu, click Run.
3. From the CD-ROM drive, run \NT4_SP3\i386\UPDATE, for example,
D:\NT4_SP3\i386\Update.
6-14