Analogue alarm clock for under-pillow vibrator (12 pages)
Summary of Contents for Casio DQR-200U
Page 1
MA0402-EB Operation Guide DQR-200U Main unit Sub-unit °C/ °F RESET TEMP. WAVE DOWN CLEAR MAX/MIN (—) RESET °C/ °F RESET TEMP. WAVE DOWN CLEAR MAX/MIN (—) RESET • A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the clock.
Operation Guide DQR-200U GENERAL GUIDE TIME CALIBRATION SIGNAL RECEPTION PRECAUTIONS • This clock is able to receive the time calibration signal transmitted from Main unit Rugby, England. Signal reception is possible within approximately Rugby 1,000 kilometers 1 SNOOZE/LIGHT button 1,000 km of the transmitter.
Operation Guide DQR-200U USING THE CLOCK 2. While the screen you want is on the display, use the Alarm Time Set buttons (2) to change the digits that are flashing. Any of the following procedures can be used to set current date and time.
Operation Guide DQR-200U THERMOMETER FUNCTIONS USING THE LIGHT Both the main unit and the sub-unit are equipped with their own temperature sensors. Temperature data measured Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the by the sub-unit is sent by wireless transfer to the main unit.
Operation Guide DQR-200U USING THE SUB-UNIT MAIN UNIT/SUB UNIT COMMUNICATION PRECAUTIONS Data Transfer from the Sub-unit Sub Unit Location • Data is transferred from the sub-unit to the main unit every three minutes. • Certain environmental conditions can greatly reduce the communication range.