Advertisement
Quick Links
MA0702-EA
ILLUSTRATION
1
2
Operation Guide DQD-106
4 5
2
3
6
7
1
8
• A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on its model number, the appearance of your clock may differ somewhat from that shown in the
illustration.
Alarm Off
Antenna Icon
Current time
(Hour, minutes, seconds)
DST indicator
PM indicator
Day of the week
Wave OK indicator
Date (month – date)
Current Temperature
GENERAL GUIDE
1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about four seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 Alarm Mode selector
SNZ: Snooze alarm on
ALM ON: Alarm on
ALM OFF: Alarm off
3 Alarm Time Set buttons
Use these buttons to change the alarm time or current time setting.
4 SET button
Use this button when setting the current time.
5 WAVE button
Press this button to receive the time calibration signal and adjust timekeeping.
6 °C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
7 RESET button
Press this button to reset the clock after replacing its batteries.
8 Batteries
Snooze Alarm On
Snooze on indicator
Alarm on indicator
1
Advertisement
Related Manuals for Casio DQD-106
Summary of Contents for Casio DQD-106
- Page 1 MA0702-EA Operation Guide DQD-106 • A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the ILLUSTRATION clock. • Depending on its model number, the appearance of your clock may differ somewhat from that shown in the illustration.
- Page 2 Operation Guide DQD-106 TIME CALIBRATION SIGNAL RECEPTION PRECAUTIONS Unsuccessful Signal Reception The antenna icon disappears from the display when a signal receive operation is unsuccessful. If this happens, • This clock is able to receive the time calibration signal transmitted from try changing the position or orientation of the clock, and press the WAVE button (5) to receive again.
- Page 3 Operation Guide DQD-106 USING THE ALARM THERMOMETER FUNCTIONS The alarm sounds and the light turns on when the alarm time you set is reached. You can also use the Alarm A built-in sensor measures temperature and shows the measured value on the display. The readout from the Mode selector (2) to select the snooze alarm feature.