Spa Interface Processors; Sip Summary - Cisco ASR1004 - ASR 1004 Modular Expansion Base Hardware Installation Manual

Overview: Cisco ASR 1000 Series Aggregation
Services Routers SIPs
This chapter describes the SPA interface processors (SIPs) that are supported on the Cisco ASR 1000
Series Aggregation Services Routers and contains the following sections:
•
•
•
•

SIP Summary

Summary descriptions of the SIPs that are supported on the Cisco ASR 1000 Series Routers are shown
in Table
The Description column indicates the aggregate bandwidth supported by the SIP across all subslots, and
Note
not per SPA subslot.
Table 2-1 SIP Summary
SIP Product Number
Cisco ASR 1000 Series ASR-1000-SIP10
SIP10G
Cisco ASR 1000 Series ASR-1000-SIP40
SIP40G
1. The Cisco ASR1000-SIP40 carrier card supports four half-height SPAs, two full-height SPAs, or a combination of two half-height and one full-height
SPAs. Double-wide SPAs are not supported.
OL-14126-12
SIP Summary, page 2-1
SPA Interface Addresses on SIPs, page 2-3
Identifying Slots and Subslots for SIPs and SPAs, page 2-3
Cisco ASR 1000 Series SPA Interface Processor Overview, page 2-7
2-1.
Description
10 Gbps SPA interface processor 4
40 Gbps SPA interface processor 4
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
2
C H A P T E R
Maximum Number of
SPAs
1
Minimum Cisco IOS
Release
Cisco IOS XE Release
2.2
Cisco IOS XE Release
3.1S
2-1