Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual page 233

Chapter 7 Configuring Call Home
To subscribe a destination profile to one or more alert groups, complete the following steps:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3
alert-group {all | configuration | environment |
inventory | syslog}
Example:
Router(cfg-call-home)# alert-group all
Step 4
profile name
Example:
Router(cfg-call-home)# profile profile1
OL-16506-10
configure terminal
call-home
alert-group {all | configuration | environment | inventory | syslog}
profile name
subscribe-to-alert-group all
subscribe-to-alert-group configuration [periodic {daily hh:mm | monthly date hh:mm | weekly
day hh:mm}]
subscribe-to-alert-group diagnostic [severity {catastrophic | critical | debugging | disaster |
fatal | major | minor | normal | notification | warning}]
subscribe-to-alert-group environment [severity {catastrophic | critical | debugging | disaster |
fatal | major | minor | normal | notification | warning}]
subscribe-to-alert-group inventory [periodic {daily hh:mm | monthly date hh:mm | weekly day
hh:mm}]
subscribe-to-alert-group syslog [severity {catastrophic | critical | debugging | disaster | fatal |
major | minor | normal | notification | warning}] [pattern string]
exit
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
How to Configure Call Home
Purpose
Enters global configuration mode.
Enters call home configuration mode.
Enables the specified alert group. Use the all
keyword to enable all alert groups. By default, all
alert groups are enabled.
Enters call home destination profile configuration
mode for the specified destination profile.
7-17