Dell Dimension 5150 Owner's Manual page 110

Drives 0 through 3
(On default)
SATA Operation
(RAID Autodetect/ATA
default)
Onboard Devices
Integrated NIC
(On default)
Integrated Audio
Controller
USB for Flexbay
(On default)
Video
Primary Video
(Auto default)
Video Memory Size
(8 MB default)
110
Appendix
Enables or disables an ATA or SATA device (such as hard-drive, CD drive,
or DVD drive). On enables the interface so that the device can be used.
Displays the Controller type (ATA or SATA), Port number the drive is
using, Drive ID number, Capacity, and whether the drive is controlled by
the BIOS.
Identifies and defines the SATA controller settings for RAID. You can set
the SATA controller to RAID Autodetect/ATA or RAID On.
Enables or disables the integrated NIC controller. Settings are On, Off, or
On w/PXE. When the On w/PXE setting is active (available only for
setting up a future boot process), the computer prompts you to press
<Ctrl><Alt><b>.
Pressing this key combination causes a menu to display that allows you to
select a method for booting from a network server. If a boot routine is not
available from the network server, the computer attempts to boot from the
next device in the boot sequence list.
Enables or disables the onboard audio controller.
Enables or disables internal USB for FlexBay.
NOTE:
This USB option appears only if a FlexBay device is installed.
Specifies which video controller is primary when two video controllers are
present on the computer. Auto enables the add-in video controller.
Onboard enables the integrated video controller.
Configures the system memory allocation reserved for the integrated video
controller. Settings are 1MB and 8MB.