Page 1
Quick Install Guide Quick Install Guide DI-713P Wireless Broadband Router with Print Server Connecting the DI-713P Wireless Router to Connecting the DI-713P Wireless Router to your network your network When you have completed the steps in this installation guide, your connected...
Page 2
DI-713P. Installing the DI-713P Installing the DI-713P Checking the IP Address of the computer being used to configure the DI-713P Wireless Router Go to Start>Run Type in “WINIPCFG”. The IP address of the computer must be between 192.168.0.2 and 192.168.0.254 in order to configure...
Page 3
Installing the DI-713P Installing the DI-713P Open the web browser, and type 192.168.0.1 into the URL address box. Note: Please disable any proxy server setting for the web browser. When the login screen appears, type “admin” in the “System Password”...
Page 4
Installing the DI-713P Installing the DI-713P Cable modem users: If you are using a cable modem, enter the “Host name” given by your cable provider. Click on “Save” and “Reboot” to save changes. DSL users: From the setup screen, click on the “Change”...
Page 5
The DI-713P default wireless settings will work out of the box with any other D-Link products. The factory settings are: channel: 6 network ssid: “default” To enable WEP encryption, select the encryption type. (Enable either the 64 or the 128 bit encryption.)
Print Server Installation (Optional) Print Server Installation (Optional) NOTE: If you choose to use the print server function, plug the printer cable from your printer into the printer port on the DI-713P.. Installing the Print Server Insert the Print Server installation CD into the CD-ROM drive.
Page 7
Print Server Installation (Optional) Print Server Installation (Optional) continued To select the default folder, Click Next Note: Please Click Browse to select an alternate folder. When this window is displayed, Click Finish...
A) Configuring your printer in WINDOWS 98 WINDOWS 98 If you are using Windows 98, please follow these instructions: Go to START> SETTINGS> PRINTERS Right Click on the printer icon that corre- sponds to the printer you have connected to the DI-713P.
Page 9
Choose the Details tab. At the “Add Port” menu, choose “D-Link LPT port (Print Server).” Please make sure the proper D-Link LPT Port (Print Server) printer driver is selected. Click “Port Settings” Type in the IP address of the DI-713P.
SETTINGS> PRINTERS. Right Click on the printer icon that corre- sponds with the printer that you have connected to the DI-713P. Select Properties, choose the Ports tab. D-Link LPT Port Make sure that the D-Link port is high- lighted as shown.
Page 11
Go to START> SETTINGS> PRINTERS. Right Click on the printer icon that corresponds with the printer that you have connected to the DI-713P. Select Properties, choose the Ports tab. Make sure that the D-Link port is highlighted D-Link Local Port as shown.
APPENDIX APPENDIX Assigning a Static IP Address If the network adapter is unable to obtain an IP address automatically from the Broadband Router, then go to: START>SETTINGS>CON- TROL PANEL>NET- WORK> highlight “TCP/IP” and Click on “Properties.” Select the “IP Address” tab, Click on “Specify an IP Address.”...
Page 13
APPENDIX APPENDIX Checking Your Network Connections Use “Ping” to check your net- work connections. Go to START>RUN Type “command” in the box. Click OK. Type “ping 192.168.0.1”, which is the IP address of the LAN port of the Broadband Router. Hit the “Enter”...