Advertisement
Windows
Connect Now
DNS-G120 Install Guide
®
Windows
Connect Now (Continued)
®
This screen appears after the settings are successfully transferred to
the USB flash drive. Follow the directions on the screen.
When inserting the USB flash
drive into the USB port on the
DNS-G120, the USB LED will
blink slowly as it detects the USB
flash drive and then turn off. The
USB LED will then quickly blink 3
times and turn off again. Once the
USB light is solid and the WLAN
LED blinks, you may unplug the
USB flash drive.
Click Next.
When the DNS-G120 wireless
setup is successful, a window
similar to this one will appear.
You have completed the wireless
configuration of the DNS-G120.
Click Finish.
Your wireless setup using WCN is now complete.
10
D-Link Systems, Inc.
Advertisement
