Configuring Flex Links And Mac Address-Table Move Update; Default Configuration - Cisco ME 3400 Software Configuration Manual

Chapter 18 Configuring Flex Links and the MAC Address-Table Move Update Feature
Figure 18-3
Switch B

Configuring Flex Links and MAC Address-Table Move Update

•
•
•
•
•

Default Configuration

The Flex Links are not configured, and there are no backup interfaces defined.
The preemption mode is off.
The preemption delay is 35 seconds.
Flex Link VLAN load-balancing is not configured.
The MAC address-table move update feature is not configured on the switch.
OL-9639-07
MAC Address-Table Move Update Example
Switch C
Port 3 Port 4
Port 1 Port 2
Switch A
Default Configuration, page 18-7
Configuration Guidelines, page 18-8
Configuring Flex Links, page 18-8
Configuring VLAN Load Balancing on Flex Links, page 18-10
Configuring the MAC Address-Table Move Update Feature, page 18-12
Configuring Flex Links and MAC Address-Table Move Update
Server
Switch D
PC
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
18-7