Activate Ir Port; Require Sim Card Pin - Motorola T250 Manual

          
Change Unlock Code
This option is used to change the unlock code.
After selecting this option, you will be asked to enter the current
security code before you can proceed.
You can now enter a four digit code to replace the old code.
By pressing the $ key, you can access this option even
when the phone is locked.

Activate IR Port

Press . Select the Quick Access feature or after the
tone, say the Voice Tag name.
Press to activate the infra-red feature.
that the phone is ready for an infra-red connection.
Your phone waits for an infra-red connection for one minute and
then automatically de-activates. Before the infra-red feature de-
activates, your phone emits an alert tone and displays the
prompt. Press to continue.
For additional setup details, see 'Setting up the Infra-Red Feature'
in the About Your Phone, Battery and SIM Card section of
this manual.
Adjust Contrast
Press . Select the Quick Access feature or after the
tone, say the Voice Tag name.
This option is used to adjust the screen contrast.
The contrast is displayed as follows:
Adjust the contrast by pressing ª© or ª« on the keypad.
Pressing or on the keypad will end the contrast
adjustment.

Require SIM Card PIN

This option is used to set, and change, the PIN code.
The PIN code can be set to protect your SIM card from
indicates
unauthorised use. If set to , access to your SIM card will be
restricted each time it is inserted or the phone is turned on.
The option has two settings, or
If the SIM card does not support PIN code disabling, these
items will not appear.
Change SIM PIN Code
This option is used to change the SIM card PIN code.
The 'Require SIM Card PIN' option must be set to
must enter the old PIN code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN code. The new PIN code must be entered
again as confirmation.
Using the Options Menu 83
Phone Setup Menu
.
and you
English