Select Phone Line; Ring Or Vibrate; Adjust Ring Volume - Motorola T250 Manual

   !       

Select Phone Line

Press . Select the Quick Access feature or after the
tone, say the Voice Tag name.
This option allows you to switch between
Availability depends on the type and settings of the SIM
card, and/or your subscription to this feature.

Adjust Ring Volume

This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
Press followed by the volume button to either
increase or decrease the ringer volume.

Ring or Vibrate

Press . Select the Quick Access feature or after the
tone, say the Voice Tag name.
and . This option sets the way your phone alerts you to an incoming
call. The options are:
• - the phone will ring with the tone specified by the
Set Ringer Tone option.
• - the phone will vibrate using VibraCall™.
• - the phone will vibrate twice and then ring.
• - the phone will just display the
message.
The setting you choose also defines the type of alert for an
incoming SMS message and an Internet service alert (except that
if you select Vibrate Then Ring, your phone will just vibrate).
Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Music Tones
There are different music tones like
and so on.
When selected, your phone will produce one of these alternative
ringer tones.
Using the Options Menu 79
Phone Setup Menu
, , ,
English