Brother MFC-790CW User Manual page 196

Level1 Level2
Network Wired LAN
(Continued) (Continued)
WLAN
See Network User's Guide on the CD-ROM
The factory settings are shown in Bold with an asterisk.
180
Level3 Level4
Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
TCP/IP BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS Config
WINS Server
DNS Server
Options Descriptions
Chooses the
Ethernet link
mode.
Chooses the
Auto*
BOOT method
Static
that best suits
your needs.
RARP
BOOTP
DHCP
[000-255]. Enter the IP
address.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Subnet
mask.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the
Gateway
[000-255].
address.
[000-255].
[000-255]
Enter the Node
BRWXXXXXXXXXXXX
name.
Chooses the
Auto*
WINS
Static
configuration
mode.
Specifies the IP
(Primary)
address of the
000.000.000.000
primary or
(Secondary)
secondary
000.000.000.000
server.
Specifies the IP
(Primary)
address of the
000.000.000.000
primary or
(Secondary)
secondary
000.000.000.000
server.