Table of Contents
Advertisement
Deleting all titles—Delete all titles
[BD-RE] [BD-R] [RAM]
Preparation
≥Release protection (
84, Setting the protection).
After performing steps 1–3 (
1
Press [3, 4] to select "Delete all
titles" and press [OK].
2
Press [2, 1] to select "Yes" and
press [OK].
3
Press [2, 1] to select "Start" and
press [OK].
A message appears when finished.
4
Press [OK].
To return to the previous screen
Press [RETURN
].
To exit the screen
Press [EXIT].
[Note]
≥Once deleted, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
≥Still picture data (JPEG) or computer data cannot be deleted.
≥Delete does not work if one or more titles are protected.
Delete BD-Video data
[SD]
You can delete the BD-Live video data (
Preparation
After performing steps 1–3 (
1
Press [3, 4] to select "Delete BD-
Video data" and press [OK].
2
Press [2, 1] to select "Yes" and
press [OK].
3
Press [2, 1] to select "Start" and
press [OK].
A message appears when finished.
4
Press [OK].
84, Common procedures)
46).
84, Common procedures)
Enabling the unit's recording function—
Format
[BD-RE] [RAM] [-RW‹V›] [+RW] [-RW‹VR›]
[BD-R] [+R] [+R]DL] (New disc only)
[SD]
Preparation
≥[BD-RE] [BD-R] [RAM] [SD] Release protection (
protection).
[Note]
Formatting deletes all contents (including computer data), and
they cannot be restored. Check carefully before proceeding.
The contents are deleted when you format a disc or card even if
you have set protection.
After performing steps 1–3 (
1
Press [3, 4] to select, "Format Disc"
or "Format Card" and press [OK].
2
Press [2, 1] to select "Yes" and
press [OK].
3
Press [2, 1] to select "Start" and
press [OK].
A message appears when formatting is finished.
[Note]
≥Formatting normally takes a few minutes; however, it may
take up to a maximum of 70 minutes ([RAM]).
≥Do not disconnect the AC mains lead while formatting.
This can render the disc or the card unusable.
4
Press [OK].
[Note]
≥When a disc or card has been formatted using this unit, it may not
be possible to use it on any other equipment.
≥[-R] [-R]DL] [CD] Formatting cannot be performed.
≥[-RW‹V›] [-RW‹VR›] You can format DVD-RW only as DVD-Video
format on this unit.
≥[HDD] Perform "Format HDD" in the Setup menu (
To stop formatting [RAM]
Press [RETURN
].
≥You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.
To return to the previous screen
Press [RETURN
].
To exit the screen
Press [EXIT].
11, 84, Setting the
84, Common procedures)
90).
RQT9434
85
Advertisement
Table of Contents
