Check, Change Or Delete A Programme; Notes On Timer Recording - Panasonic DMRBS750 - BLU-RAY DISC RECORDER Operating Instructions Manual

Check, change or delete a programme

Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Timer Recording HDD
75:15 DR FRI 27.03.2009 21:41
Channel Name Schedule Drive/Mode Space
 KiKa WED 27.05 HDD
Factory Tour 22:20 - 23:45 DR
ZDF FRI 27.03 HDD

Bruder 10:40 - 12:00
DR
 ZDFdokuk FRI HDD
Bowling Biographie 22:30 - 23:25 DR
HDD
ZDF FRI 27.03
Duell des Nachmittags 21:30 - 23:30 DR
New Timer Programme
Total 4/64 Delete
DEL
OK
Turn
RETURN
Timer Off
Icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is not activated.
[ This programme is currently recording.
Part or all of the programme will not be recorded since
the programme is overlapping.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
The programme did not complete recording because of
some reason.
Timer programmes set to Auto Renewal Recording
( 36).
The timer recording of the encrypted broadcast is
overlapping another programme.
OK: Displayed if the recording can fit in the remaining space.
> (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based on
the time remaining on the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its maximum.
( 29)
≥programmes are deactivated.
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (
step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DEL].
∫ To exit the timer recording list
Press [PROG/CHECK].
[Note]
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
OK
OK
-->
24.04
Page Up
CH
Page Down
35,

Notes on timer recording

≥Only 1 programme can be set to timer recording on the disc.
≥Timer recording will not be performed if the clock is not set.
≥If the "TV System" (
93) in the Setup menu was modified to
playback a disc or a title while on timer recording standby, return
the setting to original before the recording is started.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing. Depending on the state of the unit, playback may stop
when recording begins.
≥Timer recordings do not begin while copying in normal speed
mode.
≥The timer recording starts, whether the unit is turned on or off.
When the recording starts with the unit turned on, if you should turn
the unit off the recording status is not affected.
≥When you programme successive timer recordings to start
immediately one after the other, last 1 minute of earlier programme
will not be recorded unless it can perform 2 programmes
simultaneous recording.
Programme Programme
Recorded Recorded
≥If timer recordings overlap around the same time, some
programmes will not be recorded depending on the set timer
recordings. As for programmes with "
recording list screen, some portion or all of the programmes cannot
be recorded. Press [PROG/CHECK] to confirm. (
≥It is not possible to simultaneously record multiple programmes
from encrypted broadcasts.
Starting of the timer recording while executing other operation
( 104)
Not recorded
" displayed on the timer
left)
RQT9434
37