Table of Contents
Advertisement
Charging the Battery
Before you can use your device, you need to install and charge the battery.
A Travel Charger will be able to charge a battery fitted in a phone (as well as
providing power to the phone directly).
To ensure maximum battery performance, a new battery (or a battery that
has not been used for several months) should be charged for at least
14 hours before use (but NOT more than 24 hours).
A new battery will require several full charge / discharge cycles in order
A
to achieve its optimum performance.
A new battery, or a battery that has not been used for several months,
A
may cause a prematurely fully charged indication. Ignore this indication
and let the battery charge for several more hours.
Do not use lithium ion batteries at extremely low temperatures as the
A
maximum standby / talk time will not be available when cold.
1
Make sure that the phone is fitted with a battery. Plug the travel charger
into your phone with the release tab facing up.
2
Plug the other end of the travel charger into a suitable mains power
socket.
! Please make sure that the local mains supply voltage at your location
matches that of your charger.
3
When charging starts, you will hear an alert beep and the screen will
show (Battery Charging). Charging can take place when the device is on
or off. When the device is on, charging does not affect the normal
operation of the device.
4
When your device indicates that the battery is fully charged (Charging
Complete), press the release tab and remove the travel charger.
When your device is turned on, the battery level indicator in the top right
hand corner of the screen shows the amount of charge left in your battery.
Battery Discharged,
20 Getting Started
,
,
Battery fully charged.
Advertisement
Table of Contents
