Yamaha DM1000 Owner's Manual page 65

You can also copy the currently-selected Input Channel attenuation setting to all Input
Channels (including those not currently displayed on the screen). To do this, move the cur-
sor to the source knob that you wish to copy, then double-click the [ENTER] button. The
confirmation window appears. Select YES to execute the copy operation.
You can also set the amount of attenuation in bits. To set the amount in bits in the range of
+2 bits to –24 bits, move the cursor to the desired bit shift parameter below the attenuator
knob, then rotate the Parameter wheel. (This function is available only for the Input Chan-
nel attenuators. You cannot use this function for the Output Channel attenuators.) You can
copy the currently-selected attenuation setting in bits to all Input Channels. To do this,
move the cursor to the source bit shift parameter box that you wish to copy, then dou-
ble-click the [ENTER] button. The confirmation window appears.
Select YES to execute the copy operation.
Tip:
• You can also display the desired page by pressing the EQUALIZER [DISPLAY] button once,
then press the [SEL] button or move the fader of the corresponding channel.
• You can also set the attenuation amount (in dB) for the currently-selected channel on the
EQ | EQ Edit page.
EQ'ing Input Channels
The DM1000's Input Channels feature 4-band (LOW, LOW-MID, HIGH-MID, HIGH)
parametric EQ. The LOW-MID and HIGH-MID bands are a peaking type of EQ. The LOW
and HIGH bands can be set to shelving, peaking, or HPF and LPF respectively.
1 Press the [SEL] button or move the fader of the channel for which you wish
to adjust EQ.
2 Press the SELECTED CHANNEL EQUALIZER [DISPLAY] button repeatedly to
display the EQ | EQ Edit page.
1
Setting the Input Channels from the Display
2 3 4
65
5
6
DM1000—Owner's Manual
6