D-Link DWL-122 Manual page 16

Using the Configuration Utility with Windows OS
(continued)
Ad-Hoc Channel:
All devices in the Ad Hoc
network must be set to the
same channel
Profile IP Settings:
You can Enable or
Disable the IP Settings
portion of your profile
here. If you select
Disable you will need to
configure the IP Address
information each time you
connect to a network. If
you select Enable you will
maintain the same IP
Address information
each time you connect to
a network.
Power Mode:
Disable -this default setting consumes the most power
Enable - this setting consumes the least power
Launch Utility on Startup:
Select Enable or Disable
Data Packet Parameter:
Select the parameters here
Fragmentation Threshold:
This value should remain at its default setting of 2432. If you experience a
high packet error rate, you may slightly increase your Fragmentation
Threshold within the value range of 256 to 2432. Setting the Fragmentation
Threshold too low may result in poor performance.
RTS Threshold:
This value should remain at its default setting of 2432. If inconsistent data
flow is a problem, only a minor modification should be made.
Click Apply if you have made any changes
Advanced
16