Pair With Another Bluetooth Device - Philips TAH5209 User Manual

3
Turn on the Bluetooth function of
your Bluetooth device.
4
Pair the headphones with your
Bluetooth device, refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the headphones can not
�nd any previously connected Bluetooth device,
please put them into pairing mode (press the
power button for 5 seconds again after
powering off).
The following example shows you how to
pair the headphones with your Bluetooth
device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAH5209.
2
Enter the headphones' password
"0000" (4 zeros) if prompted. For
those devices featuring Bluetooth 3.0
or higher, there is no need to enter a
password.
7 EN
Philips TAH5209
Pair the headphones with
another Bluetooth device
If you want to pair another Bluetooth
device with the headphones, power off the
headphones, then press the power button
for 5 seconds and discover the second
device as per normal pairing.
Note
 The headphones store 5 devices in the memory.
If you try to pair more than 5 devices, the earliest
paired device is replaced by the new one.
05"