Page 2
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equip- ment, or poor work results. Model G0723 (Mfd. Since 03/24)
Drum and Sanding Sleeve Table Table Insert Sander Body Table Inserts Spindle Washers Drum and Sanding Sleeves ON/OFF Paddle Switch w/Removable Key To reduce your risk of serious injury, read this entire manual BEFORE using machine. Model G0723 (Mfd. Since 03/24)
Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0723 1/3 HP BENCHTOP OSCILLATING SANDER MODEL G0723 1/4 HP BENCHTOP OSCILLATING SANDER Product Dimensions: Weight................................46 lbs.
Page 7
The information contained herein is deemed accurate as of 2/12/2024 and represents our most recent product specifications. Model G0723 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G0723 (Mfd. Since 03/24)
Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. Model G0723 (Mfd. Since 03/24)
Page 9
EXPERIENCING DIFFICULTIES. If at any time debris. Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. Model G0723 (Mfd. Since 03/24)
Never operate without maintain support and control when sanding force adequate dust collection system in place and run- is applied. ning. However, dust collection is not a substitute for using a respirator. Model G0723 (Mfd. Since 03/24)
To reduce the risk of these hazards, avoid over- loading the machine during operation and make sure it is connected to a power supply circuit that meets the specified circuit requirements. Model G0723 (Mfd. Since 03/24)
Page 12
Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. -10- Model G0723 (Mfd. Since 03/24)
IMPORTANT: Save all packaging materials until you are completely satisfied with the machine and have resolved any issues between Grizzly or the shipping agent. You MUST have the original pack- aging to file a freight claim. It is also extremely Wear safety glasses during helpful if you need to return your machine later.
Figure 2. Box contents. NOTICE Avoid harsh solvents like acetone or brake parts cleaner that may damage painted sur- faces. Always test on a small, inconspicu- ous location first. -12- Model G0723 (Mfd. Since 03/24)
Only install in an Shadows, glare, or strobe effects that may distract access restricted location. or impede the operator must be eliminated. 18" ⁄ " Figure 3. Model G0723 working clearances. -13- Model G0723 (Mfd. Since 03/24)
Workbench Flat Washer Lock Washer Hex Nut DO NOT operate the Model G0723 without an Figure 4. Example of a "Through Mount" setup. adequate dust collection system. This sand- er creates substantial amounts of wood dust Another option is a "Direct Mount" (see example while operating.
BEFORE understanding ceeding with regular operations. Call Tech its controls and related safety information. Support for help. DO NOT operate, or allow others to operate, machine until the information is understood. -15- Model G0723 (Mfd. Since 03/24)
Read books/magazines or get formal training before beginning any proj- ects. Regardless of the content in this sec- tion, Grizzly Industrial will not be held liable The Model G0723 comes with six different-sized for accidents caused by lack of training.
Figure 10. Sleeve installation order. Secure the sanding drum with the appropri- ate drum washer and lock knob, then lock until the rubber sanding drum places slight pressure on the sanding sleeve. DO NOT overtighten the lock knob. -17- Model G0723 (Mfd. Since 03/24)
SECTION 5: MAINTENANCE Cleaning To reduce risk of shock or accidental startup, always Cleaning the Model G0723 is relatively easy. disconnect machine from Follow the Sleeve Installation instructions on power before adjustments, Page 17, taking special care to clean every maintenance, or service.
1. Use a coarser grit sanding sleeve. workpiece. 2. Using too much pressure. 2. Reduce pressure on workpiece while sanding. 3. Work held still for too long. 3. Do not keep workpiece in one place for too long. -19- Model G0723 (Mfd. Since 03/24)
Technical Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -20- Model G0723 (Mfd. Since 03/24)
SECTION 8: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. Main 2 (2-1, 2-2, 2-3, 2-4, 2-5)
Page 25
WAVY WASHER 8 X 14 X 0.4 P0723067 FOOT P0723024 BALL BEARING 6903ZZ P0723068 BASE COVER P0723025 INT RETAINING RING 30MM P0723069 TAP SCREW M5 X 10 -23- BUY PARTS ONLINE AT GRIZZLY.COM! Model G0723 (Mfd. Since 03/24) Scan QR code to visit our Parts Store.
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. -24- BUY PARTS ONLINE AT GRIZZLY.COM!
WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.