Adiusflng thePkture Qudity
The purpose
of picture
quality
adjustment
is to remove or reduce picture
noise. If the noise is not
removed
by fine tuning alone, then do the Frequency adjustments
to the utmost and fine tune
again.
After the noise has been reduced,
re-adjust the picture
so that it is aligned
on the center of
screen.
Press the SOURCE button to select "PC".
Press
the M FNU
button
...................
Press the A or V button to
select "Setup", then press the
ENTER button.
Press the A or V button to
select "PC", then press the
ENTER button.
Press the A or Y button to
....
select "Coarse" or "Fine",
then press the ENTER button.
Pressing the 4 or I_ button
to remove the picture noise.
Press the EXIT button to exit.
• This feature may change the width of the image. If necessary,
adjust the position to center.
English -