Table of Contents
Advertisement
Rep[adng theLamp
Why
do I need to replace
the lamp?
The lamp used in a projection TV has a limited lifespan. For the best screen quality it needs to be
replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.
When
do | need to replace
it?
It should be replaced when the screen becomes darker, less clear or when all three LEDson the front
(Timer, Lamp, & Temp.) are flashing.
Check
before
lamp
replacement
1. The lamp must be the same code number and type.
2. The lamp type is indicated
on the right side of the TV. It is also indicated
on the lamp case.
3. After checking
the code number
for the lamp,
give the code number to the store where you
purchased
the TV or to a Samsung
Service center.
Caution
1. Replace with the correct code numbered lamp (BP96-OO826A) to avoid damage b the TV.
2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot.
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside
the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children.
When installing the product, make sure to keep it away from
the wall (more than 10cm/4
inches) for ventilation purposes.
• Poor ventilation may cause an increase in the internal
temperature of the product, resulting in a shortened
component life and degraded performance.
F
• /
Enghsh - 6
Advertisement
Table of Contents
