Steps
After performing the steps in the pre-requisites, you are left with the palm-rest assembly.
Installing the palm-rest assembly
CAUTION:
The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
The replacement palm-rest assembly comes preassembled with the following components that include the following:
● Palm rest
● Speakers
● Wireless-antenna modules
● Touchpad
● Haptic module
● Keyboard-control board
The following image indicates the location of the palm-rest assembly and provides a visual representation of the installation
procedure.
Figure 46. Palm-rest assembly
Removing and installing Field Replaceable Units (FRUs)
79