Removing The M.2 2280 Solid-State Drive (Ssd) - Dell XPS 14 9440 Owner's Manual

Steps
1. Adhere the M.2 SSD thermal pad if it is detached from the system board during the removal process.
2. Align the notch on the M.2 2230 SSD with the tab on the SSD slot.
3. Slide and place the M.2 2230 SSD on the thermal pad in the SSD slot.
4. Insert the tab of the M.2 SSD shield into the peg on the system board.
5. Replace the screw (M2x2.5) that secures the M.2 SSD shield to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Removing the M.2 2280 solid-state drive (SSD)

CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
NOTE: Depending on the configuration ordered, your computer may support an M.2 2280 SSD or an M.2 2280 SSD.
NOTE: This procedure applies only to computers shipped with an M.2 2280 SSD.
The following image indicates the location of the M.2 2280 SSD and provides a visual representation of the removal procedure.
Figure 21. Removing the M.2 2280 solid-state drive
48 Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
computer.
computer.