Table of Contents
Advertisement
6-6. Video System Level Adjustment (When using MSU)
6-6-6.
Detail Clip Adjustment
Equipment: Waveform monitor (R, G, B)
Test Point: HD SERIAL DIGITAL OUT connector
Object:
Grayscale chart
Preparations
. Setting for MSU-700A
KNEE OFF button → OFF (lit)
DETAIL OFF button → ON (dark)
. Shoot the grayscale chart so that the chart frame is
aligned with the underscanned monitor frame.
. Iris of the lens: A = 600 ± 20 mV
Adjustment Procedures
1. Adjust the white balance.
WHITE button/MSU-700A → ON (lit)
2. Make a lines selection at the center white portion of
the grayscale chart.
6-24 (E)
3. Adjust the white limiter.
A
4. Adjust the black limiter.
Line select
MSU menu operation:
. PAINT button → ON (lit)
. Touch panel operation
(Page 1/3) → [Detail] → [Detail|3]
Adjustment Item: W.Limiter
Specification:
Adjust the edges at portion B for the
desired clip level.
MSU menu operation:
. PAINT button → ON (lit)
. Touch panel operation
(Page 1/3) → [Detail] → [Detail|3]
Adjustment Item: B.Limiter
Specification:
Adjust the edges at portion C for the
desired clip level.
B
C
HDC-900/950 MM
Advertisement
Table of Contents
