Table of Contents
Advertisement
4. Troubleshooting
4-11. Updating the TV's Software
Software Upgrade can be performed by network connection or downloading the latest firmware from "www.samsung.
com." to a USB memory device.
4-11-1. By USB
Download the firmware image and save it in a folder on the root directiory of the USB flash drive. The folder name must
be "firmware name".
Insert a USB drive containing the firmware upgrade file, downloaded from "www.samsung.com," into the TV. Please be
careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and
on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have
made will return to their default settings. We advise you to to write down your settings so that you can easily reset them
after the upgrade.
4-11-2. By Online
Upgrades the software using the Internet.
•
First, configure your network. For detailed procedures on using the Network Setting, refer to the 'Setting the
Network' instructions.
•
If The internet connection doesn't operate properly, connection can be broken, please retry downloading.
If the problem still happens, download by USB and upgrade.
4-11-3. Stanby mode upgrade(Off/On)
A manual upgrade will be automatically performed at selected time.
Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This
phenomenon may continue for more than 1 hour until the software upgrade is complete.
4-52
Advertisement
Table of Contents
