Specifications And Accessories - Kenwood TM-701A Instruction Manual

2. SPECIFICATIONS AND ACCESSORIES
2-1. SPECIFICATIONS
Frequency range 144 to 148/438 to 450 [ 144 to 148/430 to 440 144 to 146/430 to 440
Mode F3E (FM)
Antenna impedance 500
Power requirements 13.8 VDC +15% (11.7 to 15.8)
Ground Negative
Frequency stability Less than +10 ppm
Transmit mode Less than 6.9 A
Receiver mode with no signal Less than 0.6 A
Operating temperature —20 °C to +60 °C (—4°F to + 140°F)
Dimensions (W x H xD) [mm] 140 x 40 x 200 (5-1/2" x 1-37/64" x 7-7/8")
Projection included 141 x42» 212 (5-9/16" x 1-21/32" x 8-11/32")
Weight [kg] 1.4 (3.1 Ibs)
Output power Hh oa
LOW Approx. 5 W
Modulation Reactance modulation
Spurious radiation Less than —60 dB
Maximum frequency deviation +5 kHz
Audio distortion (at 60% modulation) Less than 3% (300 to 3000 Hz)
Microphone impedance 500 to 6002
Circuitry Double conversion superheterodyne
Intermediate frequency 1st/2nd 30.825 MHz/455 kHz
Sensitivity (12 dB SINAD) Less than 0.16 pV
-6 dB More than 12 kHz
—60 dB Less than 24 kHz
Spurious response Better than 60 dB
Squelch sensitivity Less than 0.1 nV
Output (5% distortion) More than 2 W across 8 Q loads
External speaker impedance 8a
Current Drain
5
z
—
G
¢
£
Ee
Selectivity
Receiver
Notes:
1. Circuit and ratings are subject to change without notice due to advancements in technology.
2. Recommended duty cycle: 1 minute Transmit, 3 minutes Reception.