Custom Adj; Digital Zoom; Keystone - Panasonic PT-VX41 Operating Instructions Manual

Screen

Custom adj.

Adjust the screen scale and position manually with
this function.
1 ) Press ▲▼ to select [Custom adj.].
2 ) Press ► or the <SELECT> button to
enter the next submenu.
3 ) Press ▲▼ to choose the item you
want to adjust.
You can choose one from the items as below:
z
Adjust the Horizontal/Vertical screen
Scale H/V
scale.
When set to [On], the aspect ratio is
H&V
fixed.
Adjust the Horizontal/Vertical screen
Position H/V
position.
Save the adjusted scale or position
Common
to all the inputs.
Reset Reset the all adjusted values.

Digital zoom +

Zoom in the images.
1 ) Press ▲▼ to select [Digital zoom +]
and then press the <SELECT> button.
The On-Screen Menu disappears and
z
[D. zoom + ] appears.
2 ) Press the <SELECT> button to zoom in
the image size and press ▲▼ ◄► to
move the image to the top/bottom/left/
right of the screen.
The Panning function can work only when the
z
image is larger than the screen size. A projected
image can be also expanded by pressing the
<D.ZOOM ▲> or the <SELECT> button.
Digital zoom -
Zoom out the images.
1 ) Press ▲▼ to select [Digital zoom -]
and then press the <SELECT> button.
The On-Screen Menu disappears and
z
[D.zoom - ] appears.
2 ) Press the <SELECT> button to zoom
out image size.
The projected image can be also compressed
z
by pressing the <D.ZOOM ▼> or the
<SELECT> button.
46
- ENGLISH
To exit the Digital zoom +/– mode, press any button
except the <D.ZOOM ▲/▼>, <SELECT> and
▲▼◄► buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the Input Source Selection Menu
( Æ page 36) again, or adjust the screen size with the
<D.ZOOM ▲/▼> buttons.
Note
When input computer signal to the projector, this function
z
will be available.
[Digital zoom +/-] cannot be selected when [True] is
z
selected in the Screen aspect
[Digital zoom +/–] are disabled and cannot be displayed
z
when [480i], [576i], [480p], [576p], [720p], [1 035i] or
[1 080i] is selected in the PC System Menu
When [Digital zoom +/–] functions are disabled,
z
will appear.

Keystone

This function is used to adjust keystone distortion of
the projected image.
1 ) Press ▲▼ to select [Keystone].
2 ) Press ► or the <SELECT> button.
3 ) Press ▲▼ to choose the item you
want to adjust.
Keystone To correct keystone distortion
To store or reset the keystone
Store
correction
The following items are the
submenus of [Store].
Keep the keystone correction even
Store when the AC power cord is plugged
out or turned off the projector.
Release the keystone correction
Reset when the AC power cord is plugged
out.
.
( )
Æ page 36 .
mark